Large Compass Stencil for Flooring Solutions

We were recently hired by a flooring company to make a 16′ x 16′ stencil for a compass and install it in a downtown Seattle building. The reversed out image was then died with a 50% black ink into the floor and the stencil was removed. We used 3M IJ35-10 vinyl to cut the stencil out of. It has great adhesion to smooth floors, so you can trust the ink wont bleed around the cut edges.

Vinyl Compass Stencil

16′ x 16′ Vinyl Compass Stencil

Vinyl Compass Stencil

16′ x 16′ Vinyl Compass Stencil

Floor Etching with ink

16′ Compass – Floor Etching with ink

Floor Etching with ink

16′ Compass – Floor Etching with ink

Save

Bright Orange Mini Paceman Stripes from design to finished product

We had a customer contact us about putting some stripes on her new Mini Paceman.  She also wanted us to match the color of her very Bright Orange mirror caps.  After some research we found a 3M Bright Orange vinyl that matched perfectly.  The customer thought mock-ups looked great, but we think the finished product looked better.

Mini Paceman Stripes

Mini Paceman Stripe Design

Mini Paceman Stripes

Mini Paceman Stripes

Mini Paceman Stripes

Mini Paceman Stripes

Mini Paceman Stripes

Mini Paceman Stripes

Full Wrap for Aces Four – From Dark Grey to Soft Red

Rick from Aces Four Sewer and Drainage gave us a call and wanted us to wrap his new dark grey Transit Van.  He wanted it red, so that’s what he got.  We used Avery Supreme “Soft Red” Wrap Film for the base and then added the rest of the graphics over the top of the original wrap.  We chose not to print the red with the graphics for 2 reasons.  First, the Supreme Wrap film will keep its color longer since it is a manufactured color instead of a printed color.  Manufactured colors are not just a top coating of ink, they are the color all the way through the film.  Which means that the UV absorption will do less damage and make the color keep true for a longer period of time.  The second reason is if Rick decides to change a phone number or some of his services, we can change those out without having to re-do an entire red section saving him money over the long run.

 

Custom Full Wrap

Transit Van Full Wrap for Aces Four

Custom Full Wrap

Transit Van Full Wrap for Aces Four

Custom Full Wrap

Transit Van Full Wrap for Aces Four

Victor Glass gets new wrap

Shane from Victor Glass contacted us to design a wrap for his new Ford Transit Connect a couple weeks ago.  Since the body of this vehicle is white, we incorporated it into the design to save Shane some money.  The blue gradient fades out to white towards the front.  The wrapped portion starts behind the drivers and passenger front doors and extends across the back.  That way we are only manufacturing and installing on half of the vehicle.  Monetarily that makes a big difference to Shane’s bottom line.  We use red cut vinyl for the lettering that extends up front.  By putting the red lettering forward and incorporating the white fade, the entire vehicle looks like it has been wrapped.

 

Ford Transit Connect Wrap

Warp on Transit Connect for Victor Glass

Ford Transit Connect Wrap

Warp on Transit Connect for Victor Glass

Ford Transit Connect Wrap

Warp on Transit Connect for Victor Glass

Custom Dimensional Wall logo for VIVAA in Issaquah, WA

We do so many vehicle jobs that it is nice to do something a little different every once in a while.  This logo is digitally printed, applied to 1/2″ black acrylic and then laser cut.  The laser cutting is key to being able to get such fine detail and sharp corners.  Normal routing would not have come out this sharp looking.  Then we mounted it to the wall with double sided adhesive tape.  I think it looks awesome and so did the customer.

Custom Dimensional Wall Logo

VIVAA – Custom Dimensional Logo

Custom Dimensional Wall Logo

VIVAA – Custom Dimensional Logo

Custom Fleur de Lis and stripes for Fiat 500X

We were contacted by Fiat of Kirkland to do some custom Striping and a Fleur de Lis design for one of their customers.  It was decided the Matte Black would be a good look for this project.  After designing the Fleur de Lis for the hood, we incorporated it into the side stripes.  Their customer really liked the look, so we went to work.

Custom graphics for Fiat 500x

Custom Fleur de Lis hood decal for Fiat 500x

Custom graphics for Fiat 500x

Custom Fleur de Lis stripes and hood decal for Fiat 500x

Custom graphics for Fiat 500x

Custom Fleur de Lis stripes for Fiat 500x

Minute Man Press of Redmond Washington get new window treatments

Today we were out putting new window vinyl up for Minute Man Press of Redmond, WA.  They had 4 windows that they wanted to advertise with, but didn’t need to see out of.  We used 3M IJ35-10 vinyl with a clear over-laminate.  Using an intermediate vinyl saved the customer money (which they liked) and it was also a little thicker (which made it easier to install and we liked that).

 

Window Graphics

Window Graphics